Quenching Oil

Gear Quenching Oil

Through years of service to the gear industry, we have conducted in-depth and meticulous research on the quenching deformation problem of gears during heat treatment.

Isothermal Graded Quenching Oil

Quenching deformation is one of the three major challenges in current heat treatment quality control.

Brightening Quenching Oil

With the development of low-oxidation, non-oxidizing, and clean heat treatment technologies, the requirements for the surface quality of workpieces after heat treatment are becoming increasingly stringent.

Thin-Film Rust Inhibitor

Low operating cost, low oil consumption.

Rapid Quenching Oil

Large parts or parts with poor hardenability often exhibit problems such as soft spots, low hardness, and insufficient hardened layer depth after quenching with ordinary quenching oil.

Rapid Bright Hardening Oil

This rapid bright hardening oil not only provides excellent brightness but also boasts a high cooling rate. It is particularly suitable for bright hardening of large-module gears, large-section bearing rings, bearing balls, and textile machinery parts under protective or controlled atmospheres.

General Quenching Oil

With the continuous development of vacuum heat treatment technology, the use of vacuum heat treatment oil is becoming increasingly common. Wanxiang vacuum heat treatment oil has been widely applied in industries such as tools, molds, bearings, and springs.

Thin-Film Rust Inhibitor

This water-soluble quenching agent is a mature and environmentally friendly type that effectively improves the working environment of heat treatment and enhances the quenching quality of workpieces.